CICSPlex SM Web User Interface Client Messages

EYUVC1000I Signon by User userid successful. Last access at time on date. Your password will expire in nn days.

Explanation: The named user signed on successfully on the date and time indicated.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1001I Signon by User userid successful. Last access at time on date.

Explanation: The named user signed on successfully on the date and time indicated.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1002I Enter a user name.

Explanation: A user name is required for signon.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Enter your user name into the form, and press "Sign on".
Administrator Action: None.
Destination: Browser.

EYUVC1003I Please enter a password.

Explanation: A password is required for signon.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Enter your password into the form and press "Sign on".
Administrator Action: None.
Destination: Browser.

EYUVC1004E Invalid User name. Please try again.

Explanation: An invalid user name has been entered into the signon form.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Enter the correct user name into the form and press "Sign on".
Administrator Action: None.
Destination: Browser.

EYUVC1005E Invalid password. Please try again.

Explanation: An invalid password has been entered into the signon form.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Enter the correct password into the form and press "Sign on".
Administrator Action: None.
Destination: Browser.

EYUVC1006E Signon failed because the User name is revoked.

Explanation: You have attempted to sign on using a user ID which has been revoked by external security manager.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Contact your system administrator.
Administrator Action: Investigate the status of the user ID in the external security manager, and reinstate if required.
Destination: Browser.

EYUVC1007E The password has expired. Please re-enter the password, enter a new password, and verify the new password.

Explanation: Your password has been expired by external security manager.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Re-enter your password, enter a new password into both the New Password and Verify New Password fields, then press "Sign on".
Administrator Action: None.
Destination: Browser.

EYUVC1008E The New Password and Verify New Password fields do not match. Please try again.

Explanation: You have attempted to change your password, but did not enter the same password in both the New Password and Verify New Password fields.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Re-enter your old password, enter a new password into both the New Password and Verify New Password fields, then press "Sign on".
Administrator Action: None.
Destination: Browser.

EYUVC1009E Signon for User ( userid ) failed. (CICS information: RESP( response1 ), RESP2( response2 ), EIBFN( eibfn )) (External security manager information: ESMRESP( esmresp ), ESMREASON( esmreason ))

Explanation: The signon process has failed for an unusual reason.
System Action: Signon terminates.
User Response: Contact your system administrator.
Administrator Action: Review EIBFN value and consult the documentation for CICS and the external security manager. Collect AUXTRACE and console log and contact IBM service if the problem cannot be resolved.
Destination: Browser.

EYUVC1010E The new password was not acceptable. Please try again.

Explanation: You attempted to change the password to a value that was rejected by external security manager.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Re-enter your password, enter a new password into both the New Password and Verify New Password fields, then press "Sign on". Your new password must conform to the external security manager rules.
Administrator Action: None.
Destination: Browser.

EYUVC1011E Unable to create User environment. User already signed on.

Explanation

You attempted to sign on, but a session was already active for the user ID. This may happen because:

You are signed on with another browser on this or another workstation.
You have previously closed all the browser windows without first selecting the "Sign off" link.
Your browser has not accepted the cookiedelivered by the Web User Interface when you signed on previously.

System Action

Signon is suspended. An input form is presented to the user.

User Response

Either go back to the browser on which you are currently signed on, or sign on again specifying the "Reconnect" option. Ensure your browser is configured to accept the cookie delivered by the Web User Interface.

Administrator Action

None.

Destination

Browser.

EYUVC1012E Unable to create User environment. Maximum user limit reached.

Explanation

You attempted to sign on, but the server already has the maximum number of users signed on.

System Action

Signon is suspended. An input form is presented to the user.

User Response

Contact your system administrator.

Administrator Action

Actions to consider include:

Persuading someone to log off.
Purging users with COVC if necessary.
Increasing the value of the MAXUSERS parameter, and restarting the server.

Destination

Browser.

EYUVC1013E Unable to create User environment. Failed to start user task.

Explanation: The signon process has failed.
System Action: Signon terminates.
User Response: Contact your system administrator.
Administrator Action: Refer to associated messages that will have been written in EYULOG.
Destination: Browser.

EYUVC1014E Unable to create User environment. Failure during user task creation.

Explanation: The signon process has failed.
System Action: Signon terminates.
User Response: Contact your system administrator.
Administrator Action: Refer to associated messages that will have been written in EYULOG.
Destination: Browser.

EYUVC1015I Signon complete for User ( userid ).

Explanation: The named user has successfully signed on.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1016I Please confirm User name.

Explanation: Signon was started with a user name specified in the URL. This name must now be confirmed.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Check (and correct, if required) the user name in the form and press "Sign on".
Administrator Action: None.
Destination: Browser.

EYUVC1017E User task failed to connect to CICSPlex SM

Explanation: The signon process has failed because a connection could not be made to CICSPlex SM for the user name specified.
System Action: Signon terminates.
User Response: Contact your system administrator.
Administrator Action: Refer to associated messages that will have been written in EYULOG.
Destination: Browser.

EYUVC1018I CICS_good_morning_message

Explanation

The current CICS 'good morning message' is displayed in this message. This message can be issued both before and after signon depending on the Web User Interface server parameter GMMTEXTMSG. The GMMTEXTMSG server parameter may be set as follows:

NO - The EYUVC1018I message is not issued.
YES - The EYUVC1018I message is issued before and after signon.
BEFORE - The EYUVC1018I message is issued before signon.
AFTER - The EYUVC1018I messages is issued after signon.

System Action

The session continues.

User Response

None.

Administrator Action

None.

Destination

Browser.

EYUVC1019E You cannot mix passwords and password phrases in a change request.

Explanation: You cannot authorize a new password with a password phrase or a new password phrase with a password.
System Action: Sign-on terminates.
User Response: Use a password to change a password or a password phrase to change a password phrase.
Administrator Action: None.
Destination: Browser.

EYUVC1020E The external security manager has not been initialized. Sign-on request failed.

Explanation: The sign-on attempt has failed because the external security manager has not been initialized.
System Action: Sign-on terminates.
User Response: Ask your security administrator to initialize the external security manager.
Administrator Action: Ensure that the external security manager has been initialized.
Destination: Browser.

EYUVC1021E The external security manager is currently not accepting signons. Please try later.

Explanation: The sign-on request has failed because the external security manager was in a tranquil state. When in a tranquil state, only signons from special users are accepted.
System Action: Sign-on terminates.
User Response: The external security manager has probably been put into a tranquil state to allow for external security manager database maintenance. Determine whether maintenance is currently occurring and how long it will take. When maintenance is finished the tranquil state should be removed from the external security manager which will allow you to sign-on. If the external security manager has not been put into a tranquil state contact your security administrator.
Administrator Action: Check that the external security manager is not in a tranquil state and ensure that it is running correctly so that sign-on can take place.
Destination: Browser.

EYUVC1022E Your userid is invalid. Please retype.

Explanation: Your user ID is invalid.
System Action: The system waits for a response.
User Response: Enter a valid user ID.
Administrator Action: None.
Destination: Browser.

EYUVC1023E Incorrect password length. Sign-on is terminated.

Explanation: The value of the Password keyword is incorrect. A password is between 1 and 8 characters. A password phrase is between 9 and 100 characters. Your security administrator might have changed the minimum or maximum lengths.
System Action: Sign-on terminates.
User Response: Enter a password of the right length. If this still fails, check with your security administrator whether they have changed the minimum or maximum password lengths.
Administrator Action: None.
Destination: Browser.

EYUVC1024E Incorrect new password length. Sign-on is terminated.

Explanation: The value of the New Password field is incorrect. A new password is between 1 and 8 characters. A new password phrase is between 9 and 100 characters. Your security administrator might have changed the minimum or maximum lengths.
System Action: Sign-on terminates.
User Response: Enter a new password of the right length. If this fails, check with your security administrator whether they have changed the minimum or maximum password lengths.
Administrator Action: None.
Destination: Browser.

EYUVC1025E Incorrect user name length. Sign-on is terminated.

Explanation: The value of the user ID keyword is incorrect. A user ID must be between 1 and 8 characters.
System Action: Sign-on terminates.
User Response: Enter a user ID of the right length.
Administrator Action: None.
Destination: Browser.

EYUVC1026E Incorrect group name length.

Explanation: The value of the group name is incorrect. A group name must be between 1 and 8 characters.
System Action: Sign-on continues and the default group associated with the user ID is used if possible.
User Response: Sign off and sign on again with a group name of the right length if required.
Administrator Action: None.
Destination: Browser.

EYUVC1027E Incorrect group name specified

Explanation: The value of the group name is invalid.
System Action: Sign-on continues and the default group associated with the user ID is used if possible.
User Response: Sign off and sign on again with a valid group name if required.
Administrator Action: None.
Destination: Browser.

EYUVC1028I The password or password phrase has been changed.

Explanation: The password or password phrase was changed successfully.
System Action: Sign-on continues unless a session for the current user already exists.
User Response: No action is required. However, if an existing user session exists, reattempt the log on using the RECONNECT option.
Administrator Action: None.
Destination: Browser.

EYUVC1029E Unable to create User environment. User task creation timed out.

Explanation: The signon process has failed.
System Action: Signon terminates.
User Response: Retry the signon. If this continues to time out, contact your system administrator.
Administrator Action: Examine the system log for problems which could delay completion of user task creation.
Destination: Browser.

EYUVC1030E Invalid user name or password. Try again.

Explanation: An invalid user name or password has been entered into the signon form.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Enter the correct user name or password into the form and press "Sign on".
Administrator Action: None.
Destination: Browser.

EYUVC1031I Enter a user name and password.

Explanation: A user name and password is required for signon.
System Action: Signon is suspended. An input form is presented to the user.
User Response: Enter your user name and password into the form, and press "Sign on".
Administrator Action: None.
Destination: Browser.

EYUVC1100I Signoff request accepted.

Explanation: You have requested to terminate the session by clicking the "Sign off" link.
System Action: The user session will be terminated as soon as possible.
User Response: Close the browser window.
Administrator Action: None.
Destination: Browser.

EYUVC1101I Signoff request failed.

Explanation: You have requested to terminate the session by clicking the "Sign off" link, but your request could not be processed correctly.
System Action: User session is terminated.
User Response: Contact your system administrator.
Administrator Action: Collect AUXTRACE, console log, and dump information, and contact IBM service.
Destination: Browser.

EYUVC1102I Press button to begin signon.

Explanation: A request has been made to the Web User Interface server but the user has not yet been authenticated.
System Action: A page containing a single button is presented to the user.
User Response: Press the button presented and then sign on using the form that appears.
Administrator Action: None.
Destination: Browser.

EYUVC1190W CMAS currently unavailable.

Explanation: The CICSPlex SM CMAS address space does not appear to be available to the interface. Attempts to sign on may fail.
System Action: A signon form is presented to the user.
User Response: Attempt to sign on. If signon attempts continue to fail, contact your system administrator.
Administrator Action: Ensure that the CMAS is active and the LMAS component of the Web User Interface server is connected to it.
Destination: Browser.

EYUVC1200E Frame-enabled browser required.

Explanation: You have attempted to sign on to the Web User Interface using a browser that does not support frames.
System Action: User session has been established but will remain inactive until the user reconnects with a Web browser with frame support or the session is destroyed by the inactivity time out.
User Response: Use a Web browser that supports frames or review your Web browser settings to ensure frame support has not been disabled.
Administrator Action: None.
Destination: Browser.

EYUVC1209E Error formatting Kernel Error data.

Explanation: A response was not received from one or more MASes in the requested scope, but an error occurred when trying to format error messages EYUVC1293E or EYUVC1294W.
System Action: The WUI screen is refreshed with data from MASes which did respond.
User Response: Contact your system administrator.
Administrator Action: Collect AUXTRACE records from the WUI Server and the CMAS, and the WUI Server and CMAS joblogs and contact your IBM Support Center.
Destination: Browser.

EYUVC1210E Requested View-set ( viewsetname ) not available.

Explanation: The named view-set was referenced but was either not present in the repository, or you are not authorized to view it.
System Action: The view is not displayed.
User Response: Contact your system administrator. Press the Back icon to continue.
Administrator Action: Check EYULOG for security exceptions, and if necessary revise the user's authorization levels.
If there is no security exception, check the view set name. If it is incorrect, use the editor to correct the view or menu link that caused the error, or correct the DEFAULTxxxxxx server parameter, as appropriate. If the view-set name is correct, use the editor to create the view-set, or use the COVC transaction to import from an export file.
Destination: Browser.

EYUVC1211E Requested Menu ( menuname ) not available.

Explanation: The named menu was referenced but either could not be loaded from the repository, or you are not authorized to view it.
System Action: The menu is not displayed.
User Response: Contact your system administrator. Press the Back icon to continue.
Administrator Action: Check EYULOG for security exceptions, and if necessary revise the user's authorization levels.
If there is no security exception, check the menu name. If it is incorrect, use the editor to correct the menu link that caused the error, or correct the DEFAULTxxxxxx server parameter, as appropriate. If the menu name is correct, use the editor to create the menu, or use the COVC transaction to import from an export file.
Destination: Browser.

EYUVC1212E A navigation error has occurred. Please use the following link to go back to your current position.

Explanation: You have requested a page out of sequence, perhaps by using the browser's Back button.
System Action: A link is provided to go back to the current page.
User Response: Select the link to return to the current page.
Administrator Action: None.
Destination: Browser.

EYUVC1213E No more windows available. Please close some windows and try again.

Explanation: You have attempted to open more windows than are permitted in a single session.
System Action: The session continues.
User Response: Use a window that is already open, or close one and try again. If you no longer have the windows open, sign off, then sign on again.
Administrator Action: None.
Destination: Browser.

EYUVC1214E Window closed.

Explanation: The interface has closed the window for which the message is displayed.
System Action: The session continues.
User Response: Close the browser window.
Administrator Action: None.
Destination: Browser.

EYUVC1215E The data required for this print operation is no longer available.

Explanation: The data used to generate a 'print preview' window is no longer available because the window from which the request was generated has been used subsequently.
System Action: The request is ignored and the session continues.
User Response: Close the browser window containing the message. If a printed display is required, open a new 'print preview' for your required display and use the browser to print the page before using the window from which the request is generated.
Administrator Action: None.
Destination: Browser.

EYUVC1216E Requested View ( viewname ) not available.

Explanation: The named view was referenced, but was not present in the view-set.
System Action: The view is not displayed.
User Response: Contact your system administrator. Press the Back icon to continue.
Administrator Action: If the view name is incorrect, use the editor to correct the view or menu link that caused the error.
If the view name is correct, then use the editor to create the view within the view-set.
Destination: Browser.

EYUVC1217E Object ( objectname ) used in View set ( viewsetname ) is not recognized in this release of CICSPlex SM.

Explanation: The named view set was created for an object that is not known. For example, the view set may have been created on another release of CICSPlex SM.
System Action: The view is not displayed.
User Response: Contact your system administrator. Press the Back icon to continue.
Administrator Action: Verify that CICSPlex SM and the Web User Interface is running at the correct release. Use the View Editor to delete the view set, if necessary.
Collect the exported view set definition, AUXTRACE, console log, and dump information, and contact IBM service if the problem cannot be resolved.
Destination: Browser.

EYUVC1218E This window is still busy with the previous request. Please try again.

Explanation: You have requested a page in a window that has not completed your previous request.
System Action: A link is provided to go back to the current page.
User Response: Select the link to return to the current page. If the request still has not completed you may see this message again and have to repeat this action.
Administrator Action: None.
Destination: Browser.

EYUVC1219E Requested View set or Menu ( name ) in repository contains an invalid version identifier.

Explanation: The requested view set or menu cannot be displayed because it contains a version identifier that does not match the current version of CICSPlex SM.
System Action: The view set or menu is not displayed.
User Response: Contact your system administrator. Press the Back icon to continue.
Administrator Action: Ensure that the Web User Interface server repository has been correctly migrated to the current version of CICSPlex SM.
Destination: Browser.

EYUVC1220E CICSPlex SM API command ( commname ) failed. ( apiresponse, apireason )

Explanation

The interface experienced an unexpected response from a CICSPlex SM API command.

System Action

The session continues.

User Response

Contact your system administrator.

Administrator Action

Review the CICSPlex SM API response and reason codes and any associated messages in the joblog and/or EYULOG to determine the cause of the problem. If the apiresponse,apireason are NOTPERMIT, USRID, review the job log for each CMAS as follows:

If the current context is a CICSplex, examine the job log for each CMAS that participates in the management of the CICSplex looking for any messages issued by the external security manager.
- The 'CMASs managing CICSplex' (EYUSTARTCICSPLEX) Web User Interface view will identify each CMAS that participates in the management of the CICSplex.
If the current context is a CMAS, examine the job log for that CMAS for any messages issued by the external security manager.

If you cannot resolve the problem, collect AUXTRACE, console log and dump information, and contact IBM service.

Destination

Browser.

EYUVC1221E CICSPlex SM not available because the CMAS has disconnected.

Explanation: The interface has lost contact with the CMAS.
System Action: The session continues but will be terminated shortly.
User Response: Sign off from the interface and sign on when the CMAS becomes available again.
Administrator Action: None.
Destination: Browser.

EYUVC1222E Possible navigation error. Parent stub invalid.

Explanation: The interface detected a problem in internal integrity.
System Action: The session continues but may continue to have problems.
User Response: Contact your system administrator. Sign off from the interface and try again.
Administrator Action: Collect AUXTRACE, console log, and dump information, and contact IBM service.
Destination: Browser.

EYUVC1223E Unable to start Editor. User not authorized.

Explanation: You attempted to access the View Editor, but your user ID was rejected by the external security manager.
System Action: The session continues but View Editor access is denied.
User Response: Contact your system administrator.
Administrator Action: Add the user into the View Editor external security manager profile if the user is to be given access to the View Editor.
Destination: Browser.

EYUVC1224E A submit error has occurred. Use the following link to go back to your current position.

Explanation: You have submitted a page without an associated action, perhaps by pressing the enter key in a text box rather than selecting a button.
System Action: A link to the current page is provided.
User Response: Select the link to return to the current page.
Administrator Action: None
Destination: Browser.

EYUVC1225E Requested user group or user profilename in repository contains an invalid version identifier.

Explanation: During sign on, the Web User Interface's attempt to retrieve information from the user profile or user group profile profilename failed because the version number associated with the object in the repository is not valid.
System Action: Sign on continues. If the message relates to a user group profile, the defaults specified as Web User Interface parameters are used for this session. If the message relates to a user profile, user favorites are not available during this session.
User Response: Contact your system administrator.
Administrator Action: Ensure that the Web User Interface server repository has been correctly migrated to the current version of CICSPlex SM.
Destination: Browser.

EYUVC1226E This help page has expired.

Explanation: The data used to generate the help page is no longer available because the window from which the request was generated has been used subsequently.
System Action: The request is ignored and the session continues.
User Response: Close the browser window containing the message. If a help page is required, return to the required view and click on the help icon.
Administrator Action: None.
Destination: Browser.

EYUVC1227W Not connected to requested group group1. Default group group2 used.

Explanation: During sign on, the Web User Interface user specified a group ( group1 ) on the sign on screen. The specified group ( group1 ) was not used as the user id is not connected to group1.
System Action: The sign on will continue, but the Web User Interface will attempt to use the users default group ( group2 ) as the name of the Web User Interface user group profile.
User Response: If the default user group profile is not appropriate, sign off the Web User Interface and specify a group on the sign on screen that the user id is connected to.
Administrator Action: Contact the security administrator to check that the group1 group specified is appropriate and that the user id is connected to that group.
The sign on group option is only available to Web User Interface users if the Web User Interface system parameter SIGNONPANEL is set to ENHANCED. If the group option is not required, set SIGNONPANEL to BASIC.
Destination: Browser.

EYUVC1230I ' externact ' ( apiact ) request completed successfully for count records.

Explanation: The request to perform an action on managed resources completed successfully.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1231E ' externact ' ( apiact ) request failed. Request complete for count records. ( apiresponse, apireason )

Explanation: The request to perform an action on managed resources failed.
System Action: Additional messages may follow with more information. The session continues, but an action may be partially complete.
User Response: Use the following messages to determine the nature of the problem. Contact the system administrator if the problem cannot be resolved.
Administrator Action: Consult the CICSPlex SM Application Programming Reference book for a description of the API response and reason codes.
Destination: Browser.

EYUVC1232E Please select one or more objects to change before pressing the ' externact ' button.

Explanation: An action button was pressed with no objects selected.
System Action: The action is not performed and the session continues.
User Response: If you wish to perform the action, select one or more objects before pressing the button again.
Administrator Action: None.
Destination: Browser.

EYUVC1233E Attribute ( attrname ) not valid for Object ( objname )

Explanation: A view definition named an invalid attribute for the object in this release of CICSPlex SM.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to correct the view definition.
Destination: Browser.

EYUVC1234E Attribute ( attrname ) cannot be altered for Object ( objname ).

Explanation: A view definition named an attribute which cannot be set for this release of CICSPlex SM.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to correct the view definition.
Destination: Browser.

EYUVC1235E Parameter ( parmname ) is not valid for Action ( action ) of Object ( objname ).

Explanation: A view definition named a parameter which does not exist for this release of CICSPlex SM.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to correct the view definition.
Destination: Browser.

EYUVC1236E Parameter ( parmname ) has unrecognized type for Action ( action ) of Object ( objname ).

Explanation: A view definition named a parameter which has an invalid specification.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to remove the parameter from the view definition. Contact IBM service.
Destination: Browser.

EYUVC1237E Parameter ( parmname ) is not valid for Action ( action ) of Object ( objname ).

Explanation: A view definition named a parameter which does not exist for this release of CICSPlex SM.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to correct the view definition.
Destination: Browser.

EYUVC1238E Parameter ( parmname ) has unrecognized type for Action ( action ) of Object ( objname ).

Explanation: A view definition named a parameter which has an invalid specification.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to remove the parameter from the view definition. Contact IBM service.
Destination: Browser.

EYUVC1239E No Attribute values altered. Action ( action ) not performed.

Explanation: You attempted to perform an action on an object but no attributes were selected for the action.
System Action: The action is not performed and the session continues.
User Response: Select attributes for update before retrying the action.
Administrator Action: None.
Destination: Browser.

EYUVC1240E Invalid value entered for Attribute ( attribute ). Action ( action ) not performed.

Explanation: You attempted to perform an action on an object but an invalid attribute value was selected for the action.
System Action: The action is not performed and the session continues.
User Response: Enter a valid value for the attribute before retrying the action. See Entering Datafor more information.
Administrator Action: None.
Destination: Browser.

EYUVC1241E Invalid value entered for Parameter ( parameter ). Action ( action ) not performed.

Explanation: You attempted to perform an action on an object but an invalid parameter value was entered for the action.
System Action: The action is not performed and the session continues.
User Response: Enter a valid value for the parameter before retrying the action.
Administrator Action: None.
Destination: Browser.

EYUVC1242E The name of the map to be used is not available. If possible, the default map object will be used.

Explanation: The name of the map object associated with the functional area to be mapped could not be obtained.
System Action: In most cases the map hyperlinks are not displayed. However, if the problem was in obtaining a user group profile, the map object specified in the DEFAULTMAPxxx server parameter is used to generate the hyperlinks.
User Response: Contact your system administrator.
Administrator Action: Check the EYULOG for security exceptions, and if necessary revise the user's authorization levels.
Destination: Browser.

EYUVC1243E The requested map ( mapname ) is not available. No map hyperlinks will be displayed.

Explanation: The named map was referenced but was not available from the repository.
System Action: The map hyperlinks are not displayed.
User Response: Contact your system administrator.
Administrator Action: Check the map name. If it is incorrect, use the editor to correct the user group profile, or correct the DEFAULTMAPxxx server parameter, as appropriate. If the map name is correct, use the editor to create the map, or use the COVC transaction to import from an export file.
Destination: Browser.

EYUVC1244E Map ( mapname ) has type ( namedmaptype ) but the map requested is for type ( requstedmaptype ). No map hyperlinks will be displayed.

Explanation: The named map was referenced but was of the wrong type for the functional area being mapped.
System Action: The map hyperlinks are not displayed.
User Response: Contact your system administrator.
Administrator Action: Check the map name. If it is incorrect, use the editor to correct the user group profile, or correct the DEFAULTMAPxxx server parameter, as appropriate. If the map name is correct, use the editor to create a map of the correct type.
Destination: Browser.

EYUVC1245E The requested map ( mapname ) in the repository contains an invalid version identifier. No map hyperlinks will be displayed.

Explanation: The requested map cannot be displayed because it contains a version identifier that does not match the current version of CICSPlex SM.
System Action: The map hyperlinks are not displayed.
User Response: Contact your system administrator.
Administrator Action: Ensure that the Web User Interface server repository has been correctly migrated to the current version of CICSPlex SM.
Destination: Browser.

EYUVC1246E The requested map ( mapname ) is not available because the user not authorized. No map hyperlinks will be displayed.

Explanation: The named map was referenced but you are not authorized to view it.
System Action: The map hyperlinks are not displayed.
User Response: Contact your system administrator.
Administrator Action: Check EYULOG for security exceptions, and if necessary revise the user's authorization levels.
Destination: Browser.

EYUVC1247E Invalid character %0 has been entered for attribute %1 at character position %2.

Explanation

A syntax error has been detected.

System Action

The requested operation is not performed.

User Response

Correct the syntax error. The trace flag syntax rules are:

Specify bits either singly or as a sequence:
- To turn bits 1, 5 and 12 on, enter 1, 5, 12.
- To turn on bits 1, 2, and 3, enter 1-3.
Bit numbers are valid only in the range 1 to 32.
Single bits and bit sequences must always be separated by a comma.
Start and end the input sequence with a bit number; for example 1, 5-8 is valid but both ,1, 5-8 and 1, 5-8, are not.
Spaces are allowed but can only precede or follow a comma, except for the first bit, which may have preceding spaces.
Single bits can be specified in any order but sequences must be specified in order; for example 1-3 is valid but 3-1 is not.
The bits numbers in a sequence cannot be the same.
All bits can be disabled either by leaving the field empty or by entering blanks.
Type 1-32 in a field to enable all bits.

Administrator Action

None.

Destination

Browser.

EYUVC1248E Bit number %0 is out of range for attribute %1 at character position %2. Bits should be within the range 1-32.

Explanation

An out of range error has been detected.

System Action

The requested operation is not performed.

User Response

Correct the out of range error. The trace flag syntax rules are:

Specify bits either singly or as a sequence:
- To turn bits 1, 5 and 12 on, enter 1, 5, 12.
- To turn on bits 1, 2, and 3, enter 1-3.
Bit numbers are valid only in the range 1 to 32.
Single bits and bit sequences must always be separated by a comma.
Start and end the input sequence with a bit number; for example 1, 5-8 is valid but both ,1, 5-8 and 1, 5-8, are not.
Spaces are allowed but can only precede or follow a comma, except for the first bit, which may have preceding spaces.
Single bits can be specified in any order but sequences must be specified in order; for example 1-3 is valid but 3-1 is not.
The bits numbers in a sequence cannot be the same.
All bits can be disabled either by leaving the field empty or by entering blanks.
Type 1-32 in a field to enable all bits.

Administrator Action

None.

Destination

Browser.

EYUVC1249E Invalid bit sequence entered for attribute %0 at character position %1.

Explanation

A bit sequence that does not conform to the required syntax has been detected.

System Action

The requested operation is not performed.

User Response

Correct the bit sequence syntax. The trace flag syntax rules are:

Specify bits either singly or as a sequence:
- To enable bits 1, 5 and 12, enter 1, 5, 12.
- To enable bits 1, 2, and 3, enter 1-3.
Bit numbers are valid only in the range 1 to 32.
Single bits and bit sequences must always be separated by a comma.
Start and end the input sequence with a bit number; for example 1, 5-8 is valid but both ,1, 5-8 and 1, 5-8, are not.
Spaces are allowed but can only precede or follow a comma, except for the first bit, which may have preceding spaces.
Single bits can be specified in any order but sequences must be specified in order; for example 1-3 is valid but 3-1 is not.
The bit numbers in a sequence cannot be the same. All bits can be disabled by either leaving the field empty or by entering blanks.
Type 1-32 in a field to enable all bits.

Administrator Action

None.

Destination

Browser.

EYUVC1250E Attributes cannot be altered for this Object ( objname ).

Explanation: You attempted to update attributes for an object which does not support the SET action for this release of CICSPlex SM.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to remove the offending action button from the view definition.
Destination: Browser.

EYUVC1251E Object ( objname ) is not recognized in this release of CICSPlex SM.

Explanation: You attempted to perform an action for an object which is not present in this release of CICSPlex SM.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to correct the view.
Destination: Browser.

EYUVC1252E Invalid Action name specified on View.

Explanation: The name of the action which you attempted to perform is not valid in CICSPlex SM.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to review the view definition.
Destination: Browser.

EYUVC1253E Action ( action ) not available for Object ( objname ).

Explanation: You attempted to perform an action which is not supported by the object in this release of CICSPlex SM.
System Action: The action is not performed and the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to review the view definition.
Destination: Browser.

EYUVC1254I Operation canceled for remaining selections.

Explanation: You selected "No to all" on the confirmation panel.
System Action: The action is not performed for the remaining selected objects, and the session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1255I Operation not performed for previous selection.

Explanation: You selected "No" on the confirmation panel.
System Action: The action has not been performed for the previous selected object. The confirmation panel is presented again for any remaining selected objects. The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1258W This action may produce a result set containing n entries. The warning threshold is n. Click Refresh to retry with different filters or click OK to proceed

Explanation: The action you have initiated may produce a large amount of data and could take some time to process.
System Action: The WUI waits for your response.
User Response: Click OK to proceed with the requested action or Refresh to amend the filters.
Administrator Action: The potential results set is larger than the value set on the default warning count (DEFAULTWARNCNT) parameter. If users are receiving a lot of these messages, you may want to check that this parameter is set appropriately.
Destination: Browser.

EYUVC1259I Potential result set size is below the n warning threshold. Click Refresh to retry with different filters or OK to proceed.

Explanation: You have refreshed the filters in response to message EYUVC1258W and the amount of data in the potential result set is now below the warning threshold.
System Action: The WUI waits for your response.
User Response: Click OK to proceed with the requested action or Refresh to amend the filters.
Administrator Action: The potential results set is now below the value set on the default warning count (DEFAULTWARNCNT) parameter. If users are receiving a lot of these messages, you may want to check that this parameter is set appropriately.
Destination: Browser.

EYUVC1260E Internal comparison operator value ( opervalue ) invalid.

Explanation: A request for a filtered view specified an internal operator which is not supported for this release of CICSPlex SM.
System Action: The request is canceled but the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to review the definition of the hyperlink that caused the error.
Destination: Browser.

EYUVC1261E Attribute ( attrname ) not found for Object ( objname ).

Explanation: A request for a filtered view specified an attribute name which is not present in the object in this release of CICSPlex SM.
System Action: The request is canceled but the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to review the definition of the hyperlink that caused the error.
Destination: Browser.

EYUVC1262E Parameter ( parmname ) not valid for Object ( objname ).

Explanation: A request for a filtered view specified a parameter which is not supported by the object in this release of CICSPlex SM.
System Action: The request is canceled but the session continues.
User Response: Contact your system administrator.
Administrator Action: Use the View Editor to review the definition of the hyperlink that caused the error.
Destination: Browser.

EYUVC1263E Attribute ( attrname ) filter contains invalid data.

Explanation: A request for a filtered view specified an invalid attribute filter value.
System Action: The requested display is presented to the user with no data records.
User Response: Review the filter values and correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the problem cannot be resolved, contact your system administrator.
Administrator Action: Use the editor to review the filters specified on the link used and correct if necessary.
Destination: Browser.

EYUVC1264E Parameter ( parmname ) filter contains invalid data.

Explanation: A request for a filtered view specified an invalid parameter filter value.
System Action: The requested display is presented to the user with no data records.
User Response: Review the filter values and correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the problem cannot be resolved, contact your system administrator.
Administrator Action: Use the editor to review the filters specified on the link used and correct if necessary.
Destination: Browser.

EYUVC1265E Attribute ( attributename ) is not supported as a filter.

Explanation: A request for a filtered view specified an attribute filter which is not supported. For example, a hidden character attribute cannot be used as a filter.
System Action: The requested display is not presented to the user.
User Response: If the problem resulted from selecting a link on a view or menu then select the Back icon to continue and contact your system administrator. If the problem resulted from entering URL request to the Web User Interface then review the attribute filters specified.
Administrator Action: Use the editor to review the filters specified on the link used and correct if necessary.
Destination: Browser.

EYUVC1266E Field length exceeded for attribute 'attributedesc' ( attributename ). Maximum length maxlen. Action ( actionname ) not performed.

Explanation: A request to perform action actionname was attempted. This request has failed as attribute 'attributedesc' exceeds the maximum allowed length of maxlen characters.
System Action: The action is not performed and the session continues.
User Response: Enter a valid value for the attribute before retrying the action. See Entering Datafor more information.
Administrator Action: None.
Destination: Browser.

EYUVC1267E Request denied as this action may produce a result set containing n1 entries which exceeds the threshold of n2. After modifying the filters, click Refresh to retry.

Explanation: The action you have initiated might produce n1 records. Your Web User Administrator has determined that you may only process requests of up to n2 records.
System Action: The WUI waits for your response.
User Response: Either amend the filters and click Refresh to retry the request, or click Cancel to return to the previous view or menu.
Administrator Action: The potential result set is larger than the default warning count value. If users are receiving a lot of these messages, you may want to check that this value is set appropriately.
Destination: Browser.

EYUVC1268I CICS information: EIBFN ( eibfn - eibfn_name ) RESP ( resp - resp_name ) RESP2 ( resp2 )

Explanation

This message provides CICS related information about a previous error as follows:

eibfn: Identifies the failing CICS command EIB function code.
eibfn_name: Identifies the failing CICS command name corresponding to eibfn.
A value of N/A will be displayed if the eibfn value cannot be resolved by the release of CICS supporting the WUI server.
resp: Identifies the failing CICS numerical (decimal) EIB RESP condition.
resp_name: Identifies the failing CICS EIB RESP condition name.
A value of N/A will be displayed if the resp value cannot be resolved by the release of CICS supporting the WUI server.
resp2: Identifies the failing CICS numerical (decimal) EIB RESP2 value.

System Action

The session continues.

User Response

Use eibfn_name and resp_name to determine the failing command and condition. If further information is required, consult the CICS documentation as follows:

For failing API or SPI CICS commands, consult section 'RESP2 values and their meanings' of the CICS User's Handbook. The eibfn_name value identifies the failing 'Command' and the resp_name value identifies the 'Condition'. Use the resp2 value to identify the 'Meaning' of the error.

If the CICS User's Handbook is not available, the CICS Application or System Programming Reference manuals may be used for API or SPI commands respectively.

For failing FEPI commands, consult the 'System programming Reference' section of the CICS Front End Programming Interface User's Guide.

If a value of N/A is displayed for eibfn_name or resp_name use the CICS User's Handbook, CICS Application Programmers reference, Systems Programmers Reference, or Front End Programming User's Guide to translate eibfn and resp into the command and condition respectively.

Administrator Action

Attempt to determine the cause of an eibfn_name command failing with a resp_name/ resp2 condition and take the appropriate action.

Destination

Browser.

EYUVC1269I Action ( action ) failed for ' objname ' in ' cicsregion '. (CICS information: EIBFN( eibfn - eibfn_name ) RESP( resp - resp_name ) RESP2( resp2Hi, resp2Lo )

Explanation

This message provides additional information following message EYUVC1231E. It is issued for each object ( objname ) for which CICS ( cicsregion ) reported a failure processing action action.

The data provided in the CICS information section of the message describes the CICS command and failing condition associated with the error as follows:

eibfn: Identifies the failing CICS command EIB function code.
eibfn_name: Identifies the failing CICS command name corresponding to eibfn.
A value of N/A will be displayed if the eibfn value cannot be resolved by the release of CICS supporting the WUI server.
resp: Identifies the failing CICS numerical (decimal) EIB RESP condition.
resp_name: Identifies the failing CICS EIB RESP condition name.
A value of N/A will be displayed if the resp value cannot be resolved by the release of CICS supporting the WUI server.
resp2Hi: Identifies the failing CICS numerical (decimal) EIB RESP2 high-order halfword value.
resp2Lo: Identifies the failing CICS numerical (decimal) EIB RESP2 low-order halfword value.

System Action

The session continues.

User Response

Use eibfn_name and resp_name to determine the failing command and condition. If further information is required, consult the CICS documentation as follows:

For a failing CSD command, with a resp_name of INVREQ, check section 'RESP2 values for EXEC CICS CREATE and EXEC CICS CSD commands' in the CICS System Programming Reference.

For other commands consult section 'RESP2 values and their meanings' of the CICS User's Handbook. The eibfn_name value identifies the failing 'Command' and the resp_name value identifies the 'Condition'. Use the resp2Hi and resp2Lo values to identify the 'Meaning' of the error.

If the CICS User's Handbook is not available, the CICS Application or System Programming Reference manuals may be used for API or SPI commands respectively.

For failing FEPI commands, consult the 'System programming Reference' section of the CICS Front End Programming Interface User's Guide.

Administrator Action

Attempt to determine the cause of an eibfn_name command failing with a resp_name/ resp2Hi and resp2Lo condition and take the appropriate action.

Destination

Browser.

EYUVC1270I Action ( action ) failed for ' objname ' in ' cicsregion '. (CICS information: EIBFN( eibfn - eibfn_name ) RESP( resp - resp_name ) RESP2( resp2 ))

Explanation

This message provides additional information following message EYUVC1231E. It is issued for each object ( objname ) for which CICS ( cicsregion ) reported a failure processing action action.

The data provided in the CICS information section of the message describes the CICS command and failing condition associated with the error as follows:

eibfn: Identifies the failing CICS command EIB function code.
eibfn_name: Identifies the failing CICS command name corresponding to eibfn.
A value of N/A will be displayed if the eibfn value cannot be resolved by the release of CICS supporting the WUI server.
resp: Identifies the failing CICS numerical (decimal) EIB RESP condition.
resp_name: Identifies the failing CICS EIB RESP condition name.
A value of N/A will be displayed if the resp value cannot be resolved by the release of CICS supporting the WUI server.
resp2: Identifies the failing CICS numerical (decimal) EIB RESP2 value.

System Action

The session continues.

User Response

Use eibfn_name and resp_name to determine the failing command and condition. If further information is required, consult the CICS documentation as follows:

If the CICS User's Handbook is not available, the CICS Application or System Programming Reference manuals may be used for API or SPI commands respectively.

For failing FEPI commands, consult the 'System programming Reference' section of the CICS Front End Programming Interface User's Guide.

Administrator Action

Attempt to determine the cause of an eibfn_name command failing with a resp_name/ resp2 condition and take the appropriate action.

Destination

Browser.

EYUVC1271I Action ( action ) failed due to attribute, ' description ' ( attrname ).

Explanation: This message provides additional information following messages EYUVC1231E and EYUVC1278E. It is issued for each Attribute which contributed to the failure and contains the Attribute's name ( attrname ) and description If message EYUVC1231E is reporting a parameter error, this message just reports which record is affected.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1272I Action ( action ) failed. explanation ( errcode ).

Explanation: This message provides additional information following messages EYUVC1231E and EYUVC1278E. It is issued for each individual failure. The explanation field describes the error code ( errcode ) reported by CICSPlex SM.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1273I Action ( action ) failed for ' resourcename ' ( resourcetype ) version resourceversion, in ' cicsregion '.

Explanation

This message provides additional information following message EYUVC1231E. It is issued for each resource ( resourcename ) for which CICS ( cicsregion ) reported a failure when attempting to install CICS resources or BAS objects.

action identifies the CICSPlex SM API action that was attempted and caused this error.

resourcename identifies the name of the CICS resource or BAS objects being installed.

resourcetype identifies the resource type of the CICS resource or BAS object.

resourceversion identifies the BAS resource version of the CICS resource or BAS object.

explanation identifies the BAS install error reason as follows:

System inactive
The CICS cicsregion is not active.
Install not authorized
The install failed as the user is not authorized to install the BAS resource.
Discard not authorized
Reserved for future use.
Install failure
The install has failed.
Install not supported
The resource being installed is not supported by the target system.
Install discard failure
An EXEC CICS CREATE with the DISCARD option has failed.
Install complete failure
An EXEC CICS CREATE with the COMPLETE option has failed.
Install connection failure
There is no CICS CONNECTION object related to the SESSIONS object being installed.
Install status failure
resourcename is already installed in CICS cicsregion, but is not in a state to allow it to be re-installed. For example, a FILE that is ENABLED.
Install not forced
The resource being installed is already installed in the target system and 'Force install value' is NO.
MAS failure
An error occurred in CICS cicsregion during the install.
MAS failure - ABEND
An ABEND occurred in CICS cicsregion during the CREATE (or equivalent) of resourcetype resources.
Resource not supported
CICS cicsregion does not support CREATE (or equivalent) of resourcetype resources.

Depending on the explanation value, this message may be followed by EYUVC1279I providing CICS information related to the failure.

System Action

The session continues.

User Response

Depending upon the explanation, take action as follows:

System inactive
Check that cicsregion is active.
Install not authorized
Check that the user is authorized to install the resource through the CICSPlex SM Simulated Security and CICSPlex SM Object Security (CPSMOBJ) definitions.
Discard not authorized
Reserved for future use.
Install failure
Contact the Systems Programmer.
Install discard failure
Check message EYUVC1279I for details related to the CREATE DISCARD failure.
Install complete failure
Check message EYUVC1279I for details related to the CREATE COMPLETE failure.
Install connection failure
There is no CICS CONNECTION object related to the SESSIONS object being installed.
Install status failure
Change the state of the existing installed resourcename object, so that it is in a suitable state to allow re- installation.
Install not forced
If the resource should be installed, force the installation by repeating the install with 'Force install value' set to YES.
MAS failure
Contact the System Programmer.
MAS failure - ABEND
Contact the System Programmer.
Resource not supported
Do not attempt to install the resource into this system, or update the CICS release of the system so that it supports installation of the specified resource

Administrator Action

Check the CICS joblog of system cicsregion to check for further messages.

For explanation reasons 'Install failure', 'MAS failure' or 'MAS failure - ABEND', collect the CICS Auxiliary trace data from the CMAS that cicsregion is connected to along with the complete CMAS and MAS joblogs and contact IBM Service.

Destination

Browser.

EYUVC1274I Action ( action ) failed due to inconsistent scope involving ' cicsregion ' binconscerrcodeexplanation (Target details: scope ' targetscope ' resource assignment ' targetassignment ' resource description ' targetdescription '. Related details: scope ' relatedscope ', resource assignment ' relatedassignment ', description ' relatedescription '.)

Explanation

This message provides additional information following message EYUVC1231E. The requested action is checked to ensure that the target and related scope values are not in conflict with each other. CICSPlex SM flags the target and related scopes as inconsistent if:

There is any overlap between the two (for example, the same CICS system is in both scopes)
The related scope is anything other than a single CICS system for which a system ID is defined

It is issued for each object for which CICS reported an inconsistent scope error.

System Action

The action is not performed for the indicated resource. This does not affect action requests already performed. Any subsequent actions are held as pending.

User Response

None

Administrator Action

None

Destination

Browser.

EYUVC1275I Action ( action ) failed due to inconsistent resource set in ' cicsregion '

Explanation

>This message provides additional information following message EYUVC1231E if an action fails due to an inconsistent resource set error. CICSPlex SM flags a resource set as inconsistent if a resource being added or updated (referred to as the candidate resource) is in conflict with a resource that already exists in the CICS system. For example, this could occur if an attempt is made to:

Assign different versions of the same resource to the same CICS system.
Assign a resource to the same CICS system as both local and remote

System Action

The session continues. This message is followed by one or more pairs of messages EYUVC1276 and EYUVC1277.

User Response

None

Administrator Action

None

Destination

Browser.

EYUVC1276I Candidate resource details: name ' candname ' ( candtype ), version ' candver ', resource group ' candrgrp ', resource assignment ' candrasg ', resource description ' candrdsc ', usage ' candusage ', system group ' candsgrp ', system type ' candtype ', assignment override ' candasgovr ',

Explanation: This message is issued following message EYUVC1275I to provide additional information about the candidate resource involved in an inconsistent resource set error.
System Action: The session continues. This message is always accompanied by message EYUVC1277.
User Response: None
Administrator Action: None
Destination: Browser.

EYUVC1277I Existing resource details: name ' existname ' ( existtype ), version ' existver ', resource group ' existgrp ', resource assignment ' existrasg ', resource description ' existrdsc ', usage ' existusage ', system group ' existsgrp ', system type ' existtype ', assignment override ' exisrasgovr ',

System Action: The session continues. This message is always accompanied by message EYUVC1276.
User Response: None
Administrator Action: None
Destination: Browser.

EYUVC1278E Unable to obtain data for requested View. externact ( apiact ) request failed. ( apiresponse, apireason ).

System Action: The data for the requested view is not displayed.
User Response: Use the subsequent messages to determine the nature of the problem. Often the error is caused by an invalid value in a filter attribute or View parameter field.
System Programmer Response: See the CICSPlex System Manager Application Programming Reference for a description of the API response and reason codes.
Destination: Browser.

EYUVC1279I CICS information: EIBFN( eibfn - eibfn_name ) RESP( resp - resp_name ) RESP2( resp2Hi, resp2Lo )

Explanation

This message provides CICS related information about a previous error as follows:

eibfn: Identifies the failing CICS command EIB function code.
eibfn_name: Identifies the failing CICS command name corresponding to eibfn.
A value of N/A will be displayed if the eibfn value cannot be resolved by the release of CICS supporting the WUI server.
resp: Identifies the failing CICS numerical (decimal) EIB RESP condition.
resp_name: Identifies the failing CICS EIB RESP condition name.
A value of N/A will be displayed if the resp value cannot be resolved by the release of CICS supporting the WUI server.
resp2Hi: Identifies the failing CICS numerical (decimal) EIB RESP2 high-order halfword value.
resp2Lo: Identifies the failing CICS numerical (decimal) EIB RESP2 low-order halfword value.

System Action

The session continues.

User Response

Use eibfn_name and resp_name to determine the failing command and condition. If further information is required, consult the CICS documentation as follows:

For a failing CREATE command, with a resp_name of INVREQ, check section 'EXEC CICS CREATE RESP2 values' in the CICS System Programming Reference.

If the CICS User's Handbook is not available, the CICS Application or System Programming Reference manuals may be used for API or SPI commands respectively. For failing FEPI commands, consult the 'System programming reference' section of the CICS Front End Programming Interface User's Guide.

Administrator Action

Attempt to determine the cause of an eibfn_name command failing with a resp_name/ resp2hi, resp2lo condition and take the appropriate action.

Destination

Browser.

EYUVC1280I count records collected at time.

Explanation: This message indicates how many records the CICSPlex SM API returned to the Web User Interface Server and the (local) Web User Interface Server time that they were collected. The number of records may not be the number of records available on the current view, for example on a summary or detail view the number of records collected may be greater than the number of records available for display.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1281W The specified CMAS context ( CMAScontext ) is not available.

Explanation: The requested resource could not be displayed as the specified CMAS context is not available to this Web User Interface server.
System Action: The requested display is presented to the user with no data records.
User Response: Review the CMAS context and, if the input field is available, correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the problem cannot be resolved, contact your system administrator. Press the Back icon to continue.
Administrator Action: If the CMAS context is incorrect, use the editor to correct the value in link used, or correct the DEFAULTCMASCTXT server parameter, as appropriate.
If the CMAS context is correct, ensure that the specified CMAS context is available to the CICSPlex SM API from Web User Interface server.
Destination: Browser.

EYUVC1282W The specified Context ( context ) is not available, or is not a CICSPlex.

Explanation: The requested resource could not be displayed as the specified Context is not available to this Web User Interface server.
System Action: The requested display is presented to the user with no data records.
User Response: Review the Context and, if the input field is available, correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the problem cannot be resolved, contact your system administrator. Press the Back icon to continue.
Administrator Action: If the Context is incorrect, use the editor to correct the value in link used, or correct the DEFAULTCONTEXT server parameter, as appropriate.
If the Context is correct, ensure that the specified Context is available to the CICSPlex SM API from Web User Interface server.
Destination: Browser.

EYUVC1283W The specified Scope ( scope ) is not available for this Context ( context ).

Explanation: The requested resource could not be displayed as the specified Scope is not available within the specified Context.
System Action: The requested display is presented to the user with no data records.
User Response: Review the Context and Scope and, if the input fields are available, correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the problem cannot be resolved, contact your system administrator. Press the Back icon to continue.
Administrator Action: If the Context or Scope are incorrect, use the editor to correct the value in link used, or correct the DEFAULTCONTEXT and DEFAULTSCOPE server parameters, as appropriate.
If the Context and Scope are correct, ensure that the specified Scope is defined to the specified Context.
Destination: Browser.

EYUVC1284E The specified Attribute filter is invalid.

Explanation: The requested resource could not be displayed as a specified filter was invalid.
System Action: The requested display is presented to the user with no data records.
User Response: Review the filter values and correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the problem cannot be resolved, contact your system administrator.
Administrator Action: Use the editor to review the filters specified on the link used and correct if necessary.
Destination: Browser.

EYUVC1285E The specified Parameter filter is invalid or is required and missing.

Explanation: The requested resource could not be displayed as a specified filter was invalid or is required and is missing a value.
System Action: The requested display is presented to the user with no data records.
User Response: Review the filter values and correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the problem cannot be resolved, contact your system administrator.
Administrator Action: Use the editor to review the filters specified on the link used and correct if necessary.
Destination: Browser.

EYUVC1286W The CMAS to which the request is directed is not available.

Explanation: The requested resource could not be displayed because the required CMAS could not be found or contacted.
System Action: The requested display is presented to the user with no data records.
User Response: Review the filter values and correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the filter values are correct, check the status of the CMAS network. If the problem cannot be resolved, contact your system administrator.
Administrator Action: Use the editor to review the filters specified on the link used and correct if necessary. If the filter values are correct, check the status of the CMAS network.
Destination: Browser.

EYUVC1287W The workload to which the request is directed is not available.

Explanation: The requested resource could not be displayed because the named workload does not exist, or the CMAS required to operate on the workload could not be contacted.
System Action: The requested display is presented to the user with no data records.
User Response: Review the filter values and correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the filter values are correct, check the status of the workload and the CMAS network. If the problem cannot be resolved, contact your system administrator.
Administrator Action: Use the editor to review the filters specified on the link used and correct if necessary. If the filter values are correct, check the status of the workload and the CMAS network.
Destination: Browser.

EYUVC1288W The requested resource is not supported by any available MASs in the specified scope.

Explanation: The requested resource could not be displayed because either none of the MASs within the specified scope are available or none of them support the requested resource object.
System Action: The requested display is presented to the user with no data records.
User Response: Review the filter values and correct as necessary. See Filtering Data Using Selection Criteriafor more information. If the filter values are correct, check the status of the MASs within the scope and that the requested resource is available on those releases.
Administrator Action: None.
Destination: Browser.

EYUVC1289W Review the filters and click OK to confirm this action

Explanation: A filter confirmation screen is being displayed for you to review and confirm the current filter criteria.
System Action: The WUI displays the filter confirmation screen and waits for a response.
User Response: Review the filter values and amend as necessary. Click OK to continue.
Administrator Action: None.
Destination: Browser.

EYUVC1290E Action action failed. Record updated by another user or application.

Explanation: An attempt to update or remove a definition has failed because the definition was updated by another user or application while the record was being viewed.
System Action: The action fails.
User Response: If you wish to retry the action, first refresh the view to display the updated definition.
Administrator Action: None.
Destination: Browser.

EYUVC1291E Action action failed. Maintenance point not available.

Explanation: An attempt to create, update, or remove a definition has failed because the maintenance point CMAS for the CICSPlex is not available. Either the maintanance point CMAS itself, or the link to it, has failed.
System Action: The action fails.
User Response: Wait for the maintenance point CMAS for the CICSPlex to become available, then retry the action. If necessary, contact your system administrator.
Administrator Action: Ensure that the maintenance point CMAS is active and linked to the Web User Interface CMAS.
Destination: Browser.

EYUVC1292I Action ( action ) failed in ' cicsregion '. explanation

Explanation

This message provides additional information following message EYUVC1231E. It is issued for each system that reported a failure.

action identifies the CICSPlex SM API action that was attempted and caused this error.

explanation identifies the BAS install error.

System Action

The session continues.

User Response

Examine the explanation provided and take appropriate action.

Administrator Action

Check the CICS joblog of system cicsregion to check for further messages.

Destination

Browser.

EYUVC1293E No response received from CMAS cmasname Reason: Reason Text (Reason Code ).

Explanation: One or more MASes did not respond because of problems communicating with the remote CMAS.
System Action: The WUI screen is refreshed with data from MASes which did respond.
User Response: Retry the request. If the problem persists, contact your system administrator.
Administrator Action: Review any messages written to the console or to the EYULOGs of the CMASes.
Destination: Browser.

EYUVC1294W No response received from MAS masname Reason: Reason Text (Reason Code ).

Explanation: A response was not received from one or more MASes in the requested scope, because of problems communicating with the MAS or executing the request in the MAS.
System Action: The WUI screen is refreshed with data from MASes which did respond.
User Response: Retry the request. If the problem persists, contact your system administrator.
Administrator Action: Review any messages written to the console or to the EYULOGs of the CMASes.
Destination: Browser.

EYUVC1300I Processing request. Please wait.

Explanation: The requested action has not completed within a period of time. Normally, this will be due to other activity in the systems being managed.
System Action: Processing continues. The results will be displayed when the request is completed.
User Response: If your request does not complete within several minutes then contact your system administrator.
Administrator Action: Review any messages that may have been written to the console and EYULOG. If there are errors from the external security manager then ensure that the user has been given the correct authority to sign on to the Web User Interface.
Destination: Browser.

EYUVC1310I Add to favorites operation canceled.

Explanation: You have clicked Cancel on an Add to favorites screen. No updates have been saved.
System Action: The previous WUI screen is redisplayed.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1311I Add to favorites operation for favoritename complete.

Explanation: You have successfully added a screen to your favorites menu.
System Action: The screen you have selected as a favorite is redisplayed. A hyperlink to this screen now appears in your favorites menu.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1312W User ( userid ) is being updated by another user. You may not alter your favorites.

Explanation: An attempt to acquire your favorites has failed because another user is updating them. You are unable to alter your favorites until the lock is released.
System Action: Processing continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1313E Repository not available or not authoirzed for User.

Explanation: An attempt to add to your favorites has failed because the repository is not available or you do not have the necessary authorization to access it.
System Action: The favorites operation fails. Other processing continues.
User Response: Contact your system administrator.
Administrator Action: Check the EYULOG for security exceptions, and if necessary revise the user's authorization levels.
Destination: Browser.

EYUVC1314I You currently do not have any favorites.

Explanation: You have successfully signed on but you do not have any user favorites.
System Action: Processing continues. No Favorites group is displayed on the navigation menu.
User Response: Click on an add to favorites icon.
Administrator Action: None.
Destination: Browser.

EYUVC1315I Attribute, attribute, has been successfully updated.

Explanation: You have successfully chosen an attribute from the picklist.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1316I Parameter, parameter, has been successfully updated.

Explanation: You have successfully chosen a parameter from the picklist.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1317I Attribute, attribute, has not been updated.

Explanation: You have cancelled the attribute selection.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1318I Parameter, parameter, has not been updated.

Explanation: You have cancelled the parameter selection.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1319E A value must be selected before clicking the OK button.

Explanation: You must select a value from the picklist before clicking the OK button.
System Action: The session continues.
User Response: Select a value and click OK or click Cancel to return to the previous screen.
Administrator Action: None.
Destination: Browser.

EYUVC1321E A menu item title is required. It cannot be blank.

Explanation: You attempted to create a favorite with a blank title. Menu items that are part of your favorites must have a valid title.
System Action: Processing continues.
User Response: Enter a valid title for the menu item.
Administrator Action: None.
Destination: Browser.

EYUVC1380I count records expanded at time.

Explanation: This message indicates how many records the CICSPlex SM API expanded and returned to the Web User Interface Server and the (local) Web User Interface Server time that they were expanded. The number of records may not be the number of records available on the current view, for example on a detail view the number of records collected may be greater than the number of records available for display.
System Action: The session continues.
User Response: None.
Administrator Action: None.
Destination: Browser.

EYUVC1400E Help page could not be generated for item itemname.

Explanation: The requested help page could not be built by the server. If you entered the address manually, please ensure that the address was entered correctly. Contact your system administrator if the problem is not resolved.
System Action: The help page is not displayed and processing continues.
User Response: If you entered the address manually, ensure that the address was entered correctly.
Administrator Action: None.
Destination: Browser.

Messages Contents Page - Help Contents Page - Notices